2024 Chevrolet LCF 4500HG Regular Cab RWD, Dejana Truck & Utility Equipment DuraBox Box Truck (Stock #J8666)
Chassis Details
Vehicle Options
- Audio system feature, 2 speakers
- Tires, front, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- Vehicle Application Truck
- Seat, front high back bucket driver and passenger tricot cloth covered reclining high back driver seat with single two-occupant fold down passenger seat (STD)
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Air conditioning, single-zone manual, integral in-dash mounted
- Emissions, 50 state certification
- Incomplete vehicle certification
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Steering wheel, urethane
- Drivetrain, rear-wheel drive
- Floor mats
- Grille, Silver
- Windows, power
- Tires, rear, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- GVWR, 14,500 lbs. (6577 kg)
- Wheels, 19.5" x 6", K steel (STD)
- Rear axle, 4.30 ratio
- Exhaust, single outlet
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Daytime Running Lamps
- Mirror, outside left-hand and right-hand with integral convex mirrors
- Rear suspension, 12,900 lbs. (5851 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Cruise control, electronic, automatic
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive. Ratios: Gear and Ratios 4.027, 2.364 ,1.532, 1.152, 0.852, 0.667, Rev. 3.064:1 (STD)
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- LED Headlamps
- Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
- Assist steps
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- Wheelbase, 150" (381.0 cm)
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Storage, door pockets
- Storage, seatback pockets
- Driver Information Center
- Glass, tinted
- Door locks, power
- Brakes, 4-wheel antilock, front and rear disc
- Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering, with an 18.8-20.9:1 gear ratio
- Medium Ash Gray, Cloth seat trim
- Wheels, 19.5" x 6", K steel
- PIO, Mirror Bracket Extension
- PIO, Extra Set of Keys
- Arc White
- Preferred Equipment Group
- PIO, Audio System, Enhanced audio system
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive.
- PIO, Rear Vision Camera
- Axle, limited slip
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- Seat, front high back bucket driver and passenger
- Ship Thru, Ocean Freight Surcharge
- PIO, Remote Keyless Entry
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- View All
Body Details
DuraBox Features
DuraBox Cargo Van is available as either aluminum sheet and post (up to 26’) or FRP (up to 24’). The aluminum design features .040” pre-painted aluminum sheet with galvanized “Z” posts on 16” centers, 2” spacing on seams, and 4” on ribs. Fiberglass Reinforced Plywood (FRP) sidewalls are also available that provide a smooth, clean exterior look that’s great for graphics.
The DuraBox Cargo Van come standard with a 10” aluminum diamond plate radius to protect the front edge from damage and heavy-duty extruded aluminum corners. Rear posts are manufactured with 4” x 5” heavy duty steel that is specifically designed to accommodate tailgate and liftgate installation.
- Features:
- 3” I-Beam crossmember construction, spaced 16”
- 4” I-Beam or channel longsills
- 12 ga galvanneal rear frame construction
- 4” rear post width
- Complete underbody undercoat
- Grab handles passenger and driver side
- 5 5/8” rear header depth
- Marker light eyebrow
- Premium Grade door with 2″ nylon rollers
- 10” aluminum diamond plate front radius
- 5” radius aluminum corner castings
- One piece aluminum roof panels
- Anti-snag roof bows on 24″ centers
- 1/2” AC plywood front wall
- ICC Bumper (Standard)
- Exterior lights meet FMVSS
- Dome light with switch in body